X
  • No products in the list
X
  • No products in the list

Biaxial underwater accelerometer 757

Miniature underwater accelerometer, 10 mV/g sensitivity, wide frequency range, titanium case for long term reliability in submerged monitoring locations, 10ft integral J6 cable, case isolated 

Product Description

Biaxial, low-profile, underwater accelerometer, 100 mV/g sensitivity, 10 ft integral J81S cable with stainless steel overbraided, case isolated 

 

Features:

  • Hermetic seal
  • 650 psi rating
  • Stainless steel overbraid integral cable
  • Rugged 316L stainless steel case
  • Low-profile mounting

 

Specifications

PARAMETER VALUE
Sensor output Dynamic vibration (IEPE)
Sensitivity 100 mV/g
Sensitivity tolerance ±10 %
Frequency response, ±3 dB 2 Hz – 2,000 Hz
Mounting thread Two 10-32 x 7/16 SHCS on 1.125″ bolt circle
Connector style Integral cable
Connector orientation Side exit

Related Products

Ultra low-noise wide band hydrophone H507A
Low frequency vector sensor 
Hydrophones are underwater microphones for acoustic measurements. Wilcoxon Sensing Technologies hydrophones are built to withstand the rigors of continuous underwater exposure in both sea water and fresh water environments. Each hydrophone uses piezoelectric crystals with a built-in electronic amplifier, to boost the low level signal of pressure waves underwater signals. The output is a dynamic AC signal superimposed upon the DC Bias Output Voltage (BOV).
Vector sensors measure the acoustic pressure and particle acceleration in three orthogonal axes. Four sensing elements, located in a single housing with a common acoustic phase center, combine to produce a cardioid directivity pattern which provides approximately 4.8 dB improvement in the signal to noise ratio over a traditional omni-directional pressure sensor.