All Products

Integral cable accelerometer

Accelerometer sensor, general purpose, 100 mV/g sensitivity, ±5% sensitivity tolerance, top exit integral cable, 16 ft. J9T2A Teflon jacketed cable

Wilcoxon underwater accelerometers are designed to be used virtually anywhere under continuous submersion. They are built to withstand the high pressures of deep submergence. Titanium cases are used when the accelerometer must be highly resistant to galvanic corrosion or mounted on titanium structures. Stainless steel can be used for applications where the accelerometer will be mounted on cast iron or mild steel structures since they are near one another on the galvanic series list.

Vector sensors

Vector sensors measure the acoustic pressure and particle acceleration in three orthogonal axes. Four sensing elements, located in a single housing with a common acoustic phase center, combine to produce a cardioid directivity pattern which provides approximately 4.8 dB improvement in the signal to noise ratio over a traditional omni-directional pressure sensor.

Hydophones

Hydrophones are underwater microphones for acoustic measurements. Wilcoxon Sensing Technologies hydrophones are built to withstand the rigors of continuous underwater exposure in both sea water and fresh water environments. Each hydrophone uses piezoelectric crystals with a built-in electronic amplifier, to boost the low level signal of pressure waves underwater signals. The output is a dynamic AC signal superimposed upon the DC Bias Output Voltage (BOV).

KVO

KVO100 VanePump Cutaway 300dpi - MD-Kinney

KVC

KVC Motor ClawPump - MD-Kinney

Alicat

Alicat Scientific manufactures the fastest, most accurate, and cost-effective mass flow meters & controllers on the market.Can be used to measure gas flow from 0.5 SCCM to 5,000 SLPM, with accuracy to to ±0.5% of reading or ±0.05% of full scale and a measurement range of 0.01-100% (10,000:1 turndown).NIST traceable calibration.Lifetime warranty. Made in the USA.

Mass Flow Controllers

Alicat Scientific Controllers are the fastest, most accurate, and cost-effective mass flow controllers on the market. Can be used to measure gas flow from 0.5 SCCM to 5,000 SLPM, with accuracy to to ±0.5% of reading or ±0.05% of full scale and a measurement range of 0.01-100% (10,000:1 turndown). NIST traceable calibration. Lifetime warranty. Made in the USA.

Pressure Controllers

The Alicat Gas Mixer precision gas mixing kits combine award winning laminar/DP based Alicat MFCs with a sophisticated pressure sensing ‘mix-module’, and an optional Microsoft® Windows® based user interface.

Applied Thermal Control

Precision Recirculating Chillers - ATC has a range of recirculating chillders that are suitable for use in labortories, manufacturing and more.

Vacuum Gauges: Ionization, Convection, Rack / Panel Mount, Vacuum Gauge Controllers.

Specializing in vacuum measurement and control instrumentation, these technologies are microprocessor-based vacuum gauge sensors utilizing the most recent advances in vacuum gauge sensor and controller design.

WGM701 Wasp™ Cold Cathode Pirani

WGM701 Wasp is InstruTech’s new full range vacuum gauge module which combines an inverted magnetron cold cathode with a pirani vacuum gauge sensor in a single device to provide pressure measurements from 7.60E-10 Torr to atmosphere.

CDM900 Micro Bee™ Capacitance Diaphragm Gauge

CDM900 Micro Bee is InstruTech’s new capacitance diaphragm vacuum gauge with a ceramic sensor. The CDM900 is a temperature compensated capacitance diaphragm vacuum gauge which provides highly accurate pressure measurements with full scale ranges from 10 Torr to 1,000 Torr.

Straight Heater

Thin-film, flexible heating jackets for semiconductor applications

Ampoule Heater

Thin-film, flexible heating jackets for semiconductor applications

Check Valve Heater

Thin-film, flexible heating jackets for semiconductor applications

Ultra-High Purity Fittings

Ultra-High Purity Fittings KITZ SCT develops and manufactures fluid control devices and systems including valves for semiconductor, pharmaceutical, thin-film, and other high-purity applications & processes.

Macurco

TracXP – Industrial / Special Hazard Gas Detection and Flame Detection Gas Detectors

MD-Kinney

Mechanical booster vacuum systems are lobe type booster pumps with internal slinger seals backed by oil-sealed rotary piston pumps. Standard equipment includes pumps, TEFC motors, bases, guards, manifold, blower exhaust temperature switch and vacuum control switch (pressure switch).

Osaka Vacuum

Turbo Molecular Pumps: Compound, Magnetically suspended, ball bearing, grease. Vacuum pumps to 10^-11 Torr.

SWAM Pneumatics

Positive-Displacement Blowers up to 50,000 CFM Vacuum Boosters Rotary Vane Compressors Dry Vacuum Pump Systems

Turbowin

High-speed Turbo Blowers and Compressors Turbo-blowers from 10 HP to 1200 HP, Turbo-compressors up to 128 PSIG, Turn-down Ratio of 40% - 100%

Veeco Flow Technology

Veeco manufactures the Piezocon® Gas Concentration Sensors and Gas Mixing Systems for MOCVD and other applications. Accurately monitors and controls the delivery of chemical precursor vapors and dopant gases in CVD and MOCVD process tools.

Whitman Controls

Whitman Controls specializes in the manufacture of miniature pressure, vacuum, temperature, and liquid level switches.

World Magnetics

World Magnetics manufactures a broad range of low and high pressure, vacuum, differential switches and is a leading producer of magnetic heads and magnetic sensors for high-end applications. With a passionate customer focus and complete end-to-end manufacturing capabilities, World Magnetics provides many customer benefits, including simplified custom engineering, quick service and turn-around, and high-quality, durable product solutions. Serving a worldwide client base, products are proudly made in the USA, designed, and engineered from headquarters in beautiful Traverse City, MI.

Rotary Vane Compressor

Bare-Shaft; Right Hand Discharge. Equivalent to Fuller C-250/300

Rotary Vane Compressor

Skid Mounted; Complete Package; Right Hand Discharge. Equivalent to Fuller C-250/300

Rotary Positive Displacement Blower

Bare-Shaft; 763 CFM; 12 PSIG; Horizontal Flow. Equivalent to GardnerDenver 6LP/LV

Rotary Positive Displacement Blower Package

Complete Package with Acoustic Enclosure; 1750 CFM; 12 PSIG; Vertical Flow;

Vacuum Truck Blower

Bare-Shaft 1480 CFM; Ultimate Vacuum 27”Hg; Horizontal Flow. Equivalent to Robuschi RBDV-125

Wilcoxon

Accelerometer sensor, general purpose, 100 mV/g sensitivity, ±5% sensitivity tolerance, top exit integral cable,...

Alicat

Alicat Scientific manufactures the fastest, most accurate, and cost-effective mass flow meters & controller...

Applied Thermal Control (ATC)

Precision Recirculating Chillers - ATC has a range of recirculating chillders that are suitable for use in labortories,...

Instrutech/Inficon

Vacuum Gauges: Ionization, Convection, Rack / Panel Mount, Vacuum Gauge Controllers....

Kitz-SCT

Ultra-High Purity Fittings KITZ SCT develops and manufactures fluid control devices and systems including valves for ...

Macurco

TracXP – Industrial / Special Hazard Gas Detection and Flame Detection Gas Detectors...

MD-Kinney

Vacuum Pumps KC, KD/KDH, KTC, KT, KLRC, A Series Vacuum Boosters ...

Osaka Vacuum

Turbo Molecular Pumps: Compound, Magnetically suspended, ball bearing, grease. Vacuum pumps to 10-11 Torr....

SWAM Pneumatics

Positive-Displacement Blowers up to 50,000 CFM Vacuum Boosters Rotary Vane Compressors Dry Vacuum Pump...

Turbowin

High-speed Turbo Blowers and Compressors Turbo-blowers from 10 HP to 1200 HP, Turbo-compressors up...

Veeco Flow Technology

Veeco manufactures the Piezocon® Gas Concentration Sensors and Gas Mixing Systems for MOCVD and other...

Whitman Controls

Whitman Controls specializes in the manufacture of miniature pressure, vacuum, temperature, and liquid level switches...

World Magnetics

World Magnetics manufactures a broad range of low and high pressure, vacuum, differential switches and is a...

FabDoctor

Thin-film, flexible heating jackets for semiconductor applications

Phone	303-279-7797
TollFree	800-279-7796
Fax	303-278-9909
Address	1075 S Yukon St, Suite 100 Lakewood, CO 80226

All Products

Newsletter