As design versions with semi-open and peripheral, turbine style impellers these models have found their solid foothold in several specific applications...
Miniature underwater accelerometer, 10 mV/g sensitivity, wide frequency range, titanium case for long term reliability in submerged monitoring locations, 10ft integral J6 cable, case isolated
Miniature underwater accelerometer, 10 mV/g sensitivity, wide frequency range, titanium case for long term reliability in submerged monitoring locations, 10ft integral J6 cable, case isolated
Miniature underwater accelerometer, 10 mV/g sensitivity, wide frequency range, titanium case for long term reliability in submerged monitoring locations, 10ft integral J6 cable, case isolated
Wilcoxon underwater accelerometers are designed to be used virtually anywhere under continuous submersion. They are built to withstand the high pressures of deep submergence. Titanium cases are used when the accelerometer must be highly resistant to galvanic corrosion or mounted on titanium structures. Stainless steel can be used for applications where the accelerometer will be mounted on cast iron or mild steel structures since they are near one another on the galvanic series list.
Vector sensors measure the acoustic pressure and particle acceleration in three orthogonal axes. Four sensing elements, located in a single housing with a common acoustic phase center, combine to produce a cardioid directivity pattern which provides approximately 4.8 dB improvement in the signal to noise ratio over a traditional omni-directional pressure sensor.
Hydrophones are underwater microphones for acoustic measurements. Wilcoxon Sensing Technologies hydrophones are built to withstand the rigors of continuous underwater exposure in both sea water and fresh water environments. Each hydrophone uses piezoelectric crystals with a built-in electronic amplifier, to boost the low level signal of pressure waves underwater signals. The output is a dynamic AC signal superimposed upon the DC Bias Output Voltage (BOV).
Alicat Scientific manufactures the fastest, most accurate, and cost-effective mass flow meters & controllers on the market.Can be used to measure gas flow from 0.5 SCCM to 5,000 SLPM, with accuracy to to ±0.5% of reading or ±0.05% of full scale and a measurement range of 0.01-100% (10,000:1 turndown).NIST traceable calibration.Lifetime warranty. Made in the USA.
The Alicat Gas Mixer precision gas mixing kits combine award winning laminar/DP based Alicat MFCs with a sophisticated pressure sensing ‘mix-module’, and an optional Microsoft® Windows® based user interface.
Specializing in vacuum measurement and control instrumentation, these technologies are microprocessor-based vacuum gauge sensors utilizing the most recent advances in vacuum gauge sensor and controller design.
WGM701 Wasp is InstruTech’s new full range vacuum gauge module which combines an inverted magnetron cold cathode with a pirani vacuum gauge sensor in a single device to provide pressure measurements from 7.60E-10 Torr to atmosphere.
CDM900 Micro Bee is InstruTech’s new capacitance diaphragm vacuum gauge with a ceramic sensor. The CDM900 is a temperature compensated capacitance diaphragm vacuum gauge which provides highly accurate pressure measurements with full scale ranges from 10 Torr to 1,000 Torr.
Ultra-High Purity Fittings
KITZ SCT develops and manufactures fluid control devices and systems including valves for semiconductor, pharmaceutical, thin-film, and other high-purity applications & processes.